When the ignition of the vehicle is turned off, the remote turn on wire stops transferring voltage and the amplifier turns off. The blue/white stripe remote turn on wire has a number of other names such as accessory wire, system remote control wire, etc…
What is the blue wire on a radio for?
You can use the blue/white amp turn on wire to power the antenna adapter. This just means that the active circuitry in your antenna will be powered up even if your stereo is not set to AM/FM radio. This isnt a problem.
What is the white wire in a car stereo?
The normal use of orange and orange/white wires is orange is for variable voltage to control display illumination dimming (i.e. the head unit display dims along with the other dash lights) while orange/white is a simple on/off signal of whether the dash lights are on (the head unit has only bright and dim display
What color wire is power on car stereo?
Power Wires: There are three power wires. The yellow wire is the one that supplies a constant 12V, the red wire is for accessories, and the orange wire with white stripes is for the dimmer or for illumination.
Is white wire positive or negative?
The black wire is positive, the white wire is negative, and the green wire is the ground.
What color is the power wire?
US, AC:The US National Electrical Code only mandates white (or grey) for the neutral power conductor and bare copper, green, or green with yellow stripe for the protective ground. In principle any other colors except these may be used for the power conductors.
Is a blue wire live or neutral?
Plug wiring coloursWireColourLiveBrownNeutralBlueEarthYellow and Green
Can I connect black wire to blue wire?
The black and blue wires need to be connected. You will be able to control your fan and lights with a single switch. You should twist the black and blue wires the same way you did the previous wires.
Does it matter which wire is black or white?
Electrical Wires The black wire is the hot wire, which carries the electricity from the breaker panel into the switch or light source. The white wire is the neutral wire, which takes any unused electricity and current and sends them back to the breaker panel.
Is gray wire positive or negative?
Wire Colors for DC Power The coloring is as follows: Positive - The wire for the positive current is red. Negative - The wire for the negative current is black. Ground - The ground wire (if present) will be white or grey.