Select Add from the telescopes box then select Stellarium directly through a serial port . Select Start/Connect on startup and then Skywatcher Synscan V3 and comm port 1 for your RS232 port (serial data cable connected directly to computer). Thanks Peter will give this a go later.
Can I connect my telescope to my PC?
The Celestron RS-232 Cable is used to connect your PC or computer to NexStar computerized telescopes via a port in the hand control. The large adapter attaches to the serial port of your computer. Connecting a computer to your telescope will also allow you to navigate the telescope from your computer screen!
How do I connect my telescope to my laptop?
There are two types of connecting your telescope to a computer. The first one is to connect telescope mount via USB that will allow you to point the telescope on anything you want with the software. The second type of connection is to place a camera into the eyepiece and connect it with the computer.
How do I connect my SynScan WIFI adapter?
Connect to a Smartphone 1) Download the “SynScan” app from App Store or Google Play onto your smartphone. 2) Connect the adapter to a Skywatcher telescope mount and turn the power on. 3) Choose “SynScan_WiFi_####” in the Wi-Fi list available on your smartphone.
How do I connect my Skywatcher mount to my computer?
4:5919:38Connect your Synscan mount to your pc - YouTubeYouTubeStart of suggested clipEnd of suggested clipYoull just have the USB printer cable that plugs straight into the side of the handset. But itsMoreYoull just have the USB printer cable that plugs straight into the side of the handset. But its the same way thats how its gotta go.
How do I connect Celestron to my computer?
0:5512:18What do you Need to Connect Your Celestron Telescope Mount to a YouTube
How do I reset my SynScan WIFI adapter?
You might even try just cycling the power off and on. I find the wording on the manual could be better: to do a factory reset, I would say turn the adapter off, wait one hour, and turn it back on. ACCESS POINT MODE—This is the factory set default.
How do I use SynScan mobile app?
0:186:28Overview of the SynScan Pro App - Orion Telescopes - YouTubeYouTube
How do you use the Synscan app?
0:186:28Overview of the SynScan Pro App - Orion Telescopes - YouTubeYouTube
How do I connect my computer to my Celestron telescope?
0:3712:18What do you Need to Connect Your Celestron Telescope Mount to a YouTube
What is SynScan?
SynScan App is an application running on Android, iOS, and Windows, for controlling Sky-Watcher motorized telescope mount. Use a proper solar filter firmly mounted on the front of the telescope for viewing the sun.
How do you align a Sky-Watcher telescope?
7:2111:13Telescope Star Alignment - Using Your SynScan Hand ControllerYouTube
What means Sky-Watcher?
To watch the sky for aircraft, satellites or UFOs or for stars, comets etc.
How do I connect my heq5 to my laptop?
If you just want to connect Stellarium, the easiest way is to just buy a USB-to-serial adapter - you will get a male end and a cable and USB connection all in one shot. But you can use the adapter you show with a standard rs-232 cable too.